Ubiquiti POE-54V-80W 54v 1480mA Gigabit PoE Injector
£61.19
The Ubiquiti PoE-54v-80W is designed to be used with the EdgePoint range or any of devices requiring 54v 1480mA to power.
POE-54V-80W Key Highlights
- Provides Earth Grounding and Surge Protection
- Helps Protect Against ESD Events
- Powers Ubiquiti EdgePoint Devices
What’s in the box?
- 1 x UK Mains Cable
- 1 x Ubiquiti 54v 1480mA Gigabit PoE Injector
Related products
-
Add to cart5 Pack. Ideal for long-range deployments, the Ubiquiti UAP-AC-LR Long Range UniFi AC1300 simultaneous dual-band WiFi PoE access point offers simultaneous, dual-band operation with 3×3 MIMO in the 2.4 GHz band and 2×2 MIMO in the 5 GHz band. The innovative antenna design provides a long-range, symmetrical-link coverage area, and the antenna gain of this Ubiquiti UAP-AC-LR UniFi AC1300 AP performs better than one-way, high transmit power does for connecting distant clients. This product comprises 5 x UAP-AC-LR.
-
Add to cartThe Ubiquiti POE-48-24W-G is a PoE Adapter for injecting power over your ethernet cable to 48 volt Ubiquiti wireless access points. This is the Gigabit version that will ensure your devices have maximum throughput. Your regular network switch is plugged in to the LAN port and the device you wish to power with POE plugged in the POE port.
-
Add to cartFormerly known as the TC-PRO, Ubiquiti’s UISP-Cable-Pro is a Category 5e cable with a highly insulating, weatherproof jacket that prevents damage from rain, snow, and other extreme climatic conditions. The cable is also fortified with internal foil shielding and a drain wire that collectively shield it from electrostatic discharge (ESD) and allow it to maintain Gigabit Ethernet link rates even when electromagnetic interference is present.
-
Add to cartCategory 5e Unscreened Cables are manufactured and tested to the ISO 11801, EN 50173 and ANSI/TIA?568?C standards for enhanced performance Category 5 cables. Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths.
-
Add to cartCantilever Shelves can be used to support both active and non-active data equipment within the rack that is none 19″ rack mountable, these shelves are fitted to the front 19″ profiles using M6 hardware and are vented which allows for air circulation around the equipment. This shelf is commonly deployed in wall racks but can also be used in floor sanding racks, universal fitting allows them to be used in a wide range of racks. The shelf allows for fitting of equipment in situations where one set of profiles have already been used for existing equipment.